TeraFlex JK: Alpine Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JK Wrangler/Unlimited models with 2-4” lifts.
Bolts to the factory control arm mounting brackets. Can be added to any existing suspension lift.
High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality.
Fits:
• JK Wrangler (2-door)
• JK Wrangler Unlimited (4-door)
• 2-4” Lift
Includes:
Alpine Short Control Arms – Adjustable:
• Front Upper – pair
• Front Lower – pair
• Rear Upper – pair
• Rear Lower – pair
Features & Benefits:
JK Alpine Short Control Arms:
• Adjustable Alpine Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 2-4” lift kits
• Alpine Control Short Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength
• Bolts to the factory control arm mounting brackets
• Install and drive simple bolt-on installation – no welding required
JK Alpine Control Arms
(all):
• Re-centers axles in the wheel well for proper suspension movement. Can also be used to increase wheelbase
• Full range of movement will not restrict articulation or flex off-road
• High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH (noise, vibration, and harshness) damping and ride quality.
• Zero maintenance forged threaded joints for smooth quiet flex
• Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance
• Anodized 6061-T6 aluminum clamp collar to secure rod end after length adjustment
• TeraFlex Lifetime Warranty against defects
Short Control Arm Specs:
JK: Alpine Short Control Arm Kit – Front Upper:
• Tube Diameter & Wall: 1-5/8” x 0.157” (42mm x 4mm)
• Factory Length = 18-3/4”
• Min. Length = 18-1/2”
• Max. Length = 19-3/4”
• Both Ends = 7/16” (12mm) Bolt
• Thread = 1-1/4”-12 UNF
• Both Bushings
JK: Alpine Short Control Arm Kit – Front Lower:
• Tube Diameter & Wall: 1-5/8” x 0.157” (42mm x 4mm)
• Factory Length = 22-5/8”
• Min. Length = 22-3/4”
• Max. Length = 24”
• Both Ends = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF
• Both Bushings
JK: Alpine Short Control Arm Kit – Rear Upper:
• Tube Diameter & Wall: 1-5/8” x 0.157” (42mm x 4mm)
• Factory Length = 17-7/16”
• Min. Length = 17-5/8”
• Max. Length = 18-7/8”
• Both Ends = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF
• Both Bushings
JK: Alpine Short Control Arm Kit – Rear Lower
• Tube Diameter & Wall: 1-5/8” x 0.157” (42mm x 4mm)
• Factory Length = 19-3/4”
• Min. Length = 19-13/16”
• Max. Length = 21-1/16”
• Both Ends = 9/16” (14mm) Bolt
• Thread = 1-1/4”-12 UNF
• Both Bushings
Note(s):
• Alignment required.
Install Time: 3.5 Hours
